4
CHARGING THE BATTERY
Fully charge Stratus’s battery prior to fi rst use. To charge the battery:
1. Insert the USB plug of the charging cord into the wall charger’s port.
When connected to an external power source, the Power LED will
fl ash on and off once.
NOTE:
The Power LED will fl ash on and off again when Stratus is
disconnected from the external power source.
2. Plug the micro USB plug into Stratus’s charging port, as shown in the
graphic on page 5.
NOTE:
The USB port of Stratus contains two parts. Insert the charging
cable into the larger, left part of the port, which is marked with the
battery symbol.
3. Plug the wall charger into an electric wall outlet. Refer to the LED
Indicator table on page 10 to determine when the battery is fully
charged.
WARNING:
Use of non-approved battery chargers may result in
decreased battery performance, permanent damage to the USB port, and/
or inoperability of Stratus and voids the warranty.
Go to www.appareo.com/stratus for a list of compatible chargers. Stratus
requires a 2.1 amp charger.