7
To remove Stratus from the mount:
1. Gently bend the longer arm of the mount’s cradle away from Stratus.
2. Remove Stratus from the snap-in mount.
Store Stratus in its travel pouch to protect it when it is not in use.
If the gel base that surrounds the snap-mount loses its adhesiveness over
time, remove the gel base from the mount and wash with water and a
gentle soap. Allow it to air dry before placing back on the glare shield.
NOTE:
Remember to disconnect all cables from Stratus before removing
it from the mount. Permanent damage may occur to connecting ports if
cables are yanked from Stratus.