600840-000037 Stratus ESG Installation Instructions (Experimental)
Rev. 1.2
Last Revised: May 9, 2016
Page 52 of 52
The screen displays a Built in Test
(BIT) failure
The display screen will display a
warning message and a degraded
state indicator
if any of
Stratus ESG’s BITs fail.
The Stratus ESG screen might display a warning
message with the following instructions below. Below is
guidance regarding how to assess the failure:
•
PRESS FUNC TO CLEAR
: A non-critical error
has been detected. The transponder will run in a
degraded state until the error is resolved.
Contact Appareo for further assistance.
•
PLEASE RESTART UNIT
: A critical error has
been detected. Restarting the unit may fix the
error. If the message returns after restarting,
contact Appareo for further assistance.
•
PLEASE SHUTDOWN UNIT
: A critical error has
been detected. Power off the unit and do not
turn it back on. Contact Appareo for further
assistance.
•
OVERHEATED
:
Stratus ESG has overheated.
Stratus ESG’s function will resume when it cools
down.
•
WAITING TO BE UNSTUCK
: A key has been
depressed for more than 20 seconds. If a key is
stuck, try to unstick the key.
•
WAITING FOR RELEASE
: The external
suppression input is constantly in a suppressed
state. Contact Appareo for further assistance.
•
ATTEMPTING TO RECOVER
: A squitter rate
error has been detected. The transponder may
recover itself, but if it does not, restart the unit. If
the warning message returns after restarting,
contact Appareo for further assistance.
Table 2: Troubleshooting guide
10.2. LUBRICATION INFORMATION
No change to basic aircraft Instructions for Continued Airworthiness (Maintenance Manuals)
10.3. EQUIPMENT REQUIRED FOR SERVICING
No change to basic aircraft Instructions for Continued Airworthiness (Maintenance Manuals)
10.4. CONSUMABLE MATERIALS
No change to basic aircraft Instructions for Continued Airworthiness (Maintenance Manuals)
© 2015-2016 Appareo Systems, LLC. All Rights Reserved