Apperson Datalink 3000 User Manual Download

Page: 10 / 16

Calibrate My Scanner

Calibrate the scanner by placing the calibration sheet face up in the

scanner and pushing the “scan/pause” button. Once the calibration sheet has

been properly scanned, the display should read “calibrated.”

How To…

aba

aaab

10%

15%

20%

25%

30%

40%

50%

60%

#28820-RR 02/11 A0788

Technical Support (800) 827-9219

Form # 28820 (rev 02/11)

Calibration Sheet

1) Insert calibration sheet into the input tray. The calibration sheet should be the

only form in the tray.

2) Press the Scan/Pause button to feed the sheet.
3) Remove calibration sheet from the exit tray and insert back into it’s protective

clear sleeve. Save for future use.

If the calibration sheet is reverse fed into the rejection tray below

the input tray then the calibration processed failed.

You will need to repeat the process.

(Formerly BenchMark)

Summary of Contents for Datalink 3000

















Search results

Summary of Contents for Datalink 3000

Reviews:

Related manuals for Datalink 3000

Brands by name

Popular brands

Apperson Datalink 3000, User Manual

Search results

Summary of Contents for Datalink 3000

Reviews:

Related manuals for Datalink 3000

Brands by name

Popular brands