20
Working with NavDive data
All data collected during your dive is stored on a removable SD memory card so that it can be easily
transferred to a PC for storage and/or analysis.
Location of SD memory card
Using the NavDive Log PC Application
The NavDive system includes a PC software application that allows the user to load the NavDive console
with useful information before the dive and download valuable dive information from the console unit
after the dive.
Before using the NavDive Log Application, it is important to properly configure your PC by following
the steps below:
1.
It is important to note that to use the Google Earth functions in the NavDIve Log software, you
must first install Google Earth on your PC and you must have an active Internet connection when
using NavDive Log.
2.
Your PC must have the ability to work with SD Cards. If your particular PC does not have this
capability built-in, you can purchase a SD Card reader that plugs into any USB port on your PC.
These are available from most electronic stores (i.e. Best Buy, etc.)
3.
The software utilizes a folder on your PC that is used as your file “library”. This must be created
before using the NavDive Log application. Follow these steps:
a.
Create a folder on your C: drive called NavDive (c:\NavDive)
b.
Then copy all directories and files from the SD Card into this folder
c.
At the end of the process, you should have the following:
Summary of Contents for NavDive
Page 1: ...1 Diver Navigation System User s Guide ...
Page 8: ...8 User interface controls Up Down Left Right and ENTER ...
Page 19: ...19 ...
Page 26: ...26 ...