Step 3 Configuration
If you have any questions or comments, please call Applied Motion Products Customer Support:
(800) 525-1609, or visit us online at www.applied-motion.com.
404 Westridge Dr.
Watsonville, CA 95076
Tel: 800-525-1609
Fax: 831-761 -6544
www.applied-motion.com
a)
Apply power to the drive.
b)
Use the
ST Configurator™
to set up the motor current, limit switches, en-
coder functionality (if applicable) and Node ID.
c)
The
ST Configurator™
includes a self-test option (under the Drive menu) to verify that
the STM23C or STM24C and power supply are correctly wired and configured.
d)
When configuration is complete, exit the
ST Configurator™
. The drive will automatically switch to CANopen Mode.
920-0043 C
STM23C/24C Quick Setup Guide
▪
Download and install
ST Configurator™
software, avail-
able at www.applied-motion.com.
▪
Launch the software by clicking Start/Programs/Ap-
plied Motion Products/ST Configurator
▪
If you have any questions or comments, please call Applied Motion Products
Customer Support 800-525-1609 or visit us online www.applied-motion.com.
Step 2 - ST Configurator
