63
SV200 DC Hardware Manual
920-0126A
4/14/2017
5.7 Control Panel Lock
To prevent unauthorized use of the key panel, a key panel lock is featured on all SV200 DC servo drives. When the panel is locked, no
function can be changed directly on drive’s control panel.
Status monitoring
Press and hold set key
for 1 second
If control panel is locked,
press any key will show lck
In control parameter lock mode,
press and hold set key
for 1 second will unlock
Unlock display
5.8 Warning And Fault Display
When power is applied, if any warnings are detected by the drive, the LED display on the drive will switch into warning or fault display
mode immediately.
If more than one warning is detected, pressing the
buttons will scroll through the warnings. Press the
or
button to clear the warning display and return to the previous display mode.
Encode Hall Failure
Any Mode
Warning And Fault Alarm Occurs
If More Than 1 Alarm Has Occur,
Press Up And Down Key To Scroll Through
Encode Fault
Pervious Monitoring Mode
S
Press Set And Mode Key
To Return From Alarm
Display Mode
M
