3
Power input
•
Your Omni DMX splitter is equipped with a universal power supply which will
allow it to operate on input voltages of
85-250 VAC @ 47-66Hz
.
•
A
1 amp 250V fuse
(3AB 1/4”x1-1/4” style) is provided for protection of internal
components and should not be replaced with a fuse larger than 1 amp.
•
The power input connector is a Neutrik
powerCON
20A (NAC3MPA-1) and is
compatible with the NAC3FCA cable mount plug.
•
The loop-thru
powerCON
connector is an NAC3MPB-1 and and is compatible
with the NAC3FCB cable mount plug.
•
The loop-thru connection is limited to 10A
. Do not connect more than 10A of
load current to this outlet as it may cause damage to the unit.
•
Each splitter comes with a 3'
powerCON
to NEMA 5-15 (Edison) input power
cable.
•
1'
powerCON
A-B jumper cables may be purchased separately to interconnect
multiple units.
Data input
•
XLR input and loop-out data connectors are provided for feeding DMX data into
the Omni splitter and connecting other devices to the same DMX line.
•
The loop-out connector passes all 5 pins directly and is not isolated from the
input.
Omni DMX Splitter V1.01 1/31/19
Input connectors, status LEDs & terminator switch
Power input, loop-thru & fuse connections
