- 1 -
Repair manual
-
specified for riveting tools series 4 (AirPower 4, EZM4000, E-412NA, AS4)
Content:
1.
Abbreviations
2.
General instructions
3.
Proper function of riveting tool
4.
Assembly drawing of riveting tool
5.
Informative list of parts of riveting tool
6.
Instructions for assembling and disassembling – steps 1-19
7.
Instructions for assembling and disassembling of chosen sub-assemblies – steps 20-25
8.
List of defects of riveting tool
9.
Description of defects and their remedies
10. Service set
11. List of special tools (assembly jigs) into the service set
1. Abbreviations:
CA - compressed air
MP - special tool (assembly jig)
D - defect
BEM - basic engine monitoring
2. General instructions:
1. Riveting tool is always deconnected from the compressed air, unless otherwise stated
2. All threads are clockwise
3. Riveting tool is gripped in a stand (see chapter 10) while assembling and disassembling, unless
otherwise stated
4. Before assembling, wash the disassembled parts in degreasing solution and insufflate with
compressed air, wipe with a cloth
5. While assembling, lubricate the sealing (O-rings, pneumatic seals) and related opposite surfaces
with oil MOGUL LV 2-3, unless stated otherwise
Summary of Contents for AirPower Series
