CLEANING THE PRINTER
44
RTP-2262 Thermal Receipt Printer
6.2 Cleaning the Manual Cutter
WARNING:
DO NOT touch the cutter teeth with bare hands.
DO NOT use liquid or alcohol solvent to clean the cutter. Otherwise, it may
become rusty.
To clean the manual cutter, use tweezers to remove scraps of paper between its
teeth.
6.3 Cleaning Interior Components
NOTE:
You need a brush and cotton swabs moistened with water.
Use cotton swabs moistened with water to clean the platen roller and the paper
sensor components such as the knob and holes.
To clean the compartment and other components, brush the interior compartment to
remove bits of paper. Or use a cotton swab moistened with water to remove sticky
paper or dust.
Platen roller
