APPENDIX
SP-7260 Multi Function POS 16
APPENDIX
Change Scanner Settings
In order to change the scanner settings please follow the sequence below:
1. OPEN the scanner Programming Mode by scanning code 1.1.
2. CHANGE SCANNER SETTINGS by scanning any of the codes 2.1.x to 10.x.x.
3. CLOSE the scanner Programming Mode by scanning code 1.1.
Reading the OPEN/CLOSE code 1.1 gives a double tone beep (Low High).
An example:
For changing the baudrate to 4800 the following codes must be scanned
successively:
1.1
→
3.1.4
→
1.1
After reading a valid barcode in Programming mode the scanner will give a High
beep.
The scanner will generate a Low beep after receiving an unexpected code.
Reading a code, for example a predefined ASCII character, directly after
entering the Programming Mode, is not allowed and the scanner will not accept
this data.
At any moment (in Programming Mode) you can scan code 1.2 to close the
programming mode without update, or code 1.3 to return to default setting.
All manuals and user guides at all-guides.com
