35
AUDIO:
This option determines the way to record sound if necessary.
ON:
Enables AUDIO recording.
OFF:
Disables AUDIO recording.
NOTE: Audio function can only be activated in the following refresh rate in NTSC(PAL):
20(17), 12(10), 5.5(5.5), 2.4(2.9), 1.22(1.52), 0.71(0.88) fields/sec
MULTIPLEXER:
For optimum image recording please set this option to
ON
when the DVR is connected to a
multiplexer for use. Set this option to
OFF
when it is only connected to a single camera or
Quad processor.
5.2 ALARM / MOTION SETTING
This menu allows users to program the configuration of alarm recording only when an alarm input is
activated. The device will record as long as the alarm input is activated.
ALM OPERATION:
This option determines whether to activate/deactivate the alarm recording when it detects an alarm input.
ON:
The device activates the alarm recording when it detects an alarm input.
OFF:
The device ignores the alarm signal when it detects an alarm input.
REC RATE:
This option is for the purpose of adjusting the number of pictures recorded every second into a storage
disk when an alarm input is activated. For a NTSC unit, there are 5 different record speeds you can
select from:
60F/S (60 fields per second), 30F/S, 20F/S, 12F/S,
and
REMAIN.
For a PAL unit, there
are 5 different record speeds you can select from:
50F/S (50 fields per second), 25F/S, 17F/S, 10F/S,
and
REMAIN.
If you select
REMAIN
for use,
the device will record images at the same speed as set on
the
REC
page.
MAIN MENU
RECORD
ALARM / MOTION
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO ALARM / MOTION PAGE
ALARM / MOTION
ALM OPERATION : OFF
REC RATE
: 20F/S
REC QUALITY
: BEST
AUDIO
: OFF
ALM TYPE
: NO
ALM DURATION
: 0 SEC
PRE- ALARM
: OFF
MOTION SETTING
MAIN PAGE
ALARM REC ENABLE
Summary of Contents for DVR-3011S
Page 2: ......
