48
8. ALARM INPUT LINK:
Enter and set each channel to activate (
ON
) or deactivate (
OFF
) the three modes of "
SENSOR
",
"
V
( VIDEO )-
LOSS
", and "
ACTIVE
".
SENSOR:
An alarm is triggered when the sensor is touched.
V-LOSS:
An alarm occurs when video is lost.
ACTIVE:
Alarms which are activated while the motion detection function is operating.
9. ALARM OUT LINK:
Enter and activate (
YES
) or deactivate (
NO
) the three alarm output modes of "
SENSOR
",
"
V-LOSS
" and "
ACTIVE
" for the following : ALARM OUT 1, 2, and 3, BUZZER, START
RECORDING, and the DISPLAY and CALL UP functions of the MAIN/CALL monitors.
10. RETURN
Go back to the previous page.
5.6.2 RECORD SETTING
This page enables you to set the recording rate and recording quality, and enables you to set the audio
sampling rate and the channel mode.
1. RECORD QUALITY:
You can enter and set each channel's record quality at 4 different levels of recording images from
"
BEST
","
HIGH
", and "
STANDARD
" to "
BASIC
".
2. NORMAL RECORD RATE:
The rate range is from 1 field per second (F/S) to 60 F/S.
3. AUDIO SAMPLING RATE:
This item has 4 options: "
44K Hz
", "
22K
Hz
", "
8K
Hz
", and "
DISABLE
".
4. AUDIO CHANNEL MODE:
The options here are "
STEREO
" ( two channels with the same input ), and "
LEFT
INPUT
" and
"
RIGHT
INPUT
" ( two channels which work separately ).
5. RETURN:
Go back to the previous page.
ADVANCED SETTING
1 ALARM SETTING:
ENTER
2 RECORD SETTING:
ENTER
3 MOTION SETTING:
ENTER
4 CAMERA COVER:
ENTER
5 OPERATION LOCK:
ENTER
6 COMMUNICATION:
ENTER
7 DISK SETUP:
ENTER
8 SCHEDULE:
ENTER
RETURN
menu: exit
enter: select
▲
/
▼
/jog/ch1~8: item
RECORD SETTING
1 RECORD QUALITY:
ENTER
2 NORMAL RECORD RATE:
30 F/S
3 AUDIO SAMPLING RATE:
44K Hz
4 AUDIO CHANNEL MODE:
STEREO
RETURN
menu: exit
enter: select
shuttle: value
▲
/
▼
/jog/ch1~4: item
Summary of Contents for DVR-3016, DVR-3016D
Page 2: ......
Page 100: ...98 Figure 7 RMN040200255 V5 2 ...
