61
Alarm Input Link:
Select a camera to activate or deactivate the three modes of "
Sensor
", "
V
(video)
-Loss
", and "
Motion
".
Sensor:
The alarm input in each channel can be
set to
On
or
Off
.
V-Loss:
An alarm occurs when video is lost.
Activate (to
On
) or deactivate (to
Off
) this
option.
Motion:
Alarms which are activated while the
motion detection function is operating. Activate
(to
On
) or deactivate (to
Off
) this option.
Click "Submit" to set it.
Alarm Output:
Set to
On
or
Off
the three alarm output modes of "
Sensor
", "
V
(video)
-Loss
", and "
Motion
" for the following:
Alarm Out, Buzzer, Log, Display, Start Recording and Full Screen.
Click "Submit" to set it.
6.2.2.5 Change Schedule Settings
The user can manually set the schedule. For the checked area of the setting page you can set the schedules
or delete the schedules.
Check/uncheck any/all of the boxes set in the
“Schedule” page to enable/disable the
programmed recording function.
The functioning schedule boxs are colored orange
and the non-functioning schedule bar(s) is colored
gray.
You can just right click on the functioning schedule
bar ( in orange color) to “Select all”, “Clear all” or
“Restore”.
Click "Submit" to set it.
Summary of Contents for DVR-3254S
Page 2: ......
Page 74: ...72 Figure 7 Verifying IP Address of DVR RMN0400372 V1 2 ...
