Approx appPCI100V2, User Manual

1. FEATURES 
Key features  

• Complies with the Ethernet IEEE802.3 100Base-TX and 10Base-T 
Industry standard 
• 32-bit PCI local bus master architecture  
• Auto-sensing 10/100Mbps speed  
• Plug–and-Play for automatic configuration 
• LED indicators (Link, Activity) 
• Low power consumption 

Software support 

• Supports Windows® 95/ 98/ ME/ 2000/ XP/  Vista/ 7; Linux 

Technical specification  

• Connector: RJ-45 
• Standard: IEEE802.3 10Base-T; IEEE802.3 100Base-TX                 
• Transmission Rate: 10Mbps or 20Mbps, 100Mbps or 200Mbps 
• IRQ Line: Assigned by system  
• I/O Address: Assigned by system      
• Power consumption: 1.8W (Max) 

2.  INSTALLATION 
Hardware Installation: 

1. Turn off the computer, open the cover of the computer case. 
2. Select a free PCI slot. Remove the cover from the slot. Keep the screw. 
You will be using it in the next step. 
3. Carefully slide the APPPCI100V2 LAN card into the chosen slot. Press 
firmly on the top of the modem to seal it. Fasten the LAN card to your 
system with screw you removed in the previous step. Replace the 
computer’s cover. 
4. Plug and Fasten one RJ45 port of the network cable into the 
APPPCI100V2 LAN card.  
5. Connect all the power adapter and some other accessories. 

Software Installation: 

Use the driver from the CD included in this product.