GB
12
GB
02
GB
13
Pull upwards on the adjusting ring (07) in the direction of
the arrow to the maximum height.
Press on the release handle (09) in the direction of the
arrow to release the headrest (08), and then adjust the
headrest (08) up or down to the desired position. Upon
release of this handle (09), the headrest will lock into
place automatically.
The headrest (08) is in the correct position when the
diagonal belt section (10) of the 3-point vehicle belt sits
on the child’ s shoulders and when you can fit 2 fingers
between the bottom edge of the headrest and the
shoulder of the child.
20
17
19
2)
3)
4)
07
08
17
08
10
20
REARWARD
FACING
GROUP 0
+/I
07
08
09
19
Press the release button of the Top Tether adjuster B (47)
to release the Top Tether strap (48) to the desired length.
Pull and hold the release handle (11) to adjust the child
car seat (12) to the desired recline position. Upon
release of this handle (11), the child car seat (12) will
lock into place automatically.
Ensure the child car seat is at the desired recline posi-
tion, and then tighten the free end of Top Tether adjuster
B (47) until the indicator shows green.
Pull the rotation button (13) outwards to release the child
car seat (12), and then rotate the child car seat (12) by
90º, at where the child car seat will lock into place auto-
matically.
To rotate it back to the rearward facing position: pull the
rotation button (13) outwards to release the child car
seat (12), and then rotate the child car seat (12) by 90º
back to the rearward facing position, at where the child
car seat will lock into place automatically.
Ensure the child car seat is at the rearward facing posi-
tion, and in fullest recline position.
Double check the Top Tether. If necessary, tighten the
free end of Top Tether adjuster B (47) until the indicator
shows green.
Pull and hold the release handle (11) to adjust the child
car seat (12) to the desired recline position. Upon release
of this handle (11), the child car seat (12) will lock into
place automatically.
CAUTION! The child restraint system must be always in
fullest recline position (Group 0+/I, Rearward Facing).
11
21
21
15
1)
1)
2)
3)
4)
1)
2)
3)
10
22
22
2.4 Adjust recline position
2.4.1 With Top Tether (Apramo
®
Dual Tether™) (Group I/II/III,
Forward Facing)
11
47
48
12
11
1
2
3 4
21
15
2.4.2 Without Top Tether (Apramo
®
Dual Tether™) (Group II/III)
2.5 Use 360° rotation system
2.5.1 To rotate 90º with Top Tether (Apramo
®
Dual Tether™) in
Rearward Facing (Group 0+/I, Rearward Facing)
10
22
13
12
Pull the rotation button (13) outwards to release the child car seat (12), and then rotate the
child car seat (12) by 180º, at where the child car seat will lock into place automatically.
Unthread the Top Tether strap (48) out of the belt guide (17).
(Refer to section 2.2.2)
Adjust the recline position to the desired position if necessary.
(Refer to section 2.4.1)
Ensure the child car seat is at the forward facing position, and the desired recline position.
Then tighten the free end of Top Tether adjuster B (47) until the indicator shows green.
Press the release button of the Top Tether adjuster B (47) to release the Top Tether strap
(48) to the maximum or desired length.
Pull the rotation button (13) outwards to release the child car seat (12), and then rotate
the child car seat (12) by 90º or 180º, at where the child car seat will lock into place
automatically.
22
22
10
1)
1)
2)
2)
3)
4)
2.5.2 To rotate 180º with Top Tether (Apramo
®
Dual Tether™) from Rearward Facing
(Group 0+/I, Rearward Facing) to Forward Facing (Group I, Forward Facing)
2.5.3 With Top Tether (Apramo
®
Dual Tether™) in Forward Facing (Group I/II/III)
Summary of Contents for ALL STAGE Series
Page 44: ......
