5. Adjust the suction and the pace
•
Press the +/- to adjust the level.
•
We recommend you to start pumping the milk with level 1 of suction and
pace for your first use.
•
After you are familiar with the operation, you can adjust the level depending on
your situation and needs.
•
When you need to release from milk engorgement, you can try a higher level of
suction.
•
You can press the “M” button for longer than 2 seconds to switch between
“massage mode” and “pump mode”.
•
You can change to “massage mode” after pumping to release your breast or
stimulate lactation.
7. Switching off
•
When finish pumping, press the POWER button and unplug the adapter.
8. Cleaning
•
Please clean the pump body, massage cushion, valve, bottle, teat, screw ring,
sealing disc immediately after every use.
•
Cover, sealing ring, pedestal, and connection need cleaning every week.
•
Attention: Clean the valve carefully not to break the tip.
Never use a brush or detergent to clean.
9. Sterilizing
•
Please clean and sterilize all PP and silicone accessories. TIPS BELOW:
a. Scalding
•
Put the accessories in the boiling water for 5 mins
•
Never let the accessories touch the side of the pots to prevent from distortion
b. Steam sterilization by the microwave
•
Please use sterilization containers for microwave sterilization
•
Please sterilize in the microwave according to the information.
c. Steam sterilization
•
All the accessories can be sterilized by a steam sterilizer.
D. Other methods
•
Never use dry heat, UV or
dish-washing machine to sterilize.
Attention: Please keep all parts dry after sterilizing
Please follow sterilzer instructions.
10. Storing milk
•
Store the milk in either the fridge or freezer after collecting.
