Measurement
1.
Install a battery in the battery compartment (See “Changing the battery”)
2.
Turn on the power by briefly pressing the “ON” button (confirm that the display is
on by looking through the eyepiece).
3.
Adjust the diopter to obtain a clear display through the eyepiece.
4.
Position the target in the center of the aiming reticule.
4.1 For Single measurement mode, press and release the “ON” button. The
result will display momentarily.
4.2 For Scan measurement mode, press and hold the “ON” button while
slowly moving the rangefinder from one target to next. The results will
refresh as each new data is obtained.
Changing the measurement unit (M or Y)
1.
Install a battery i
n the battery compartment (See “Changing the battery”)
2.
Make sure that the display is
OFF
(confirm by looking through the eyepiece. If
necessary, wait about 20 seconds for the display to shut off).
3.
Press and hold the “ON” button for about 5 seconds. The
display will turn on and the
measurement unit will be displayed as M (meters) or Y (yards).
4.
The units will continue switching as long as the “ON” button is pressed. To keep a
preferred setting, release the “ON” button when your choice is displayed.
Technical specifications
Reflective Range
6 to 600 yards
Accuracy
±1 yards @ ≤ 100 yards / ±2 yards @ ≥ 100 yards
Magnification
6 X
Objective Lens Diameter
20 mm
Linear Field of View
344 feet / 105 m @ 1000 yards/meters
Angular Field of View (Objective)
6 degree
Angular Field of View (Apparent) ISO 14132-1:2002
35 degree
Display
LCD
Meter/Yard Selector
Yes
Laser
Class 1 Eye Safe
Measuring Time
<0.8s at ≤ 100
yards /
<1.5 s at ≥ 100
yards
Battery Type
3V CR2 Lithium Battery
Environmental Rating
IPX4
Dimensions (Length x Width x Height)
3.9 x 3 x 1.4 in / 96 x 77 x 36 mm
Weight
5.6 ounces / 160 g
Warranty
2 years
Use
Golf, Hunting, Target Shooting
Apresys International Inc.
2410 Camino Ramon, Suite 170,
San Ramon, CA 94583, USA
www.apresysoptics.com
T: (925)272-7788
F: (925)271-8806
