The use of rubber eyepiece may cause skin irritation or inflammation in some case. If any
symptoms occur, stop using this product immediately and consult a doctor.
When transporting or carrying the Apresys Binocular, store it in the included soft case.
If your Apresys Binocular should fail to operate correctly, stop using it immediately and consult
your local dealer for instructions on its repair.
Rain, water, sand or mud should be removed from the body of the product as soon as possible,
using a soft, clean cloth.
Do not leave the Apresys Binocular in a car on a hot or sunny day, or near a heat-generating
equipment. Doing so may negatively affect its operation.
Do not leave the Apresys Binocular in direct sunlight. UV and excessive heat may negatively
affect or damage the unit.
Always protect binoculars from shock. If you cannot obtain a normal image after dropping or
getting the binoculars wet, take them immediately to the shop where you purchased them.
If the Apresys Binocular is exposed to sudden changes in temperature, condensation may occur
on lens surfaces. In this case, thoroughly dry the binoculars at room temperature.
Care and Maintenance (Lenses)
When removing dust from the lens surface, use a soft, oil-free brush.
When removing stains or smudges, like fingerprints, from the lens surface, wipe the lenses very
gently with a soft, clean, lint-free cloth or quality oil-free lens tissue. Once a cloth has been used
for cleaning the body, it should not be used for lens surface.
Care and Maintenance (Main Body)
Clean the body with a soft, clean cloth. Do not use cleaners containing solvents.
Storage
Water condensation or mold may occur due to high humidity. It is recommended to store the
Apresys Binocular in a cool, dry place.
After use in inclement weather, thoroughly dry the Apresys Binocular at room temperature,
then store it in a cool and dry place.
