background image

AP6003L/R-BLK  - 2 Panel Bath Screen Black LH/RH 

 

 

 

AP6003L/R  - 2 Panel Bath Screen LH/RH

This product should be installed by a suitably qualified and proficient person. The fitting instructions should be 

followed carefully to ensure a proper and safe installation. Failure to follow these  instructions could result in future 

injury.

These instructions and list of parts assume that installation is done against solid/tiled walls.

Please check this product for damage prior to starting the installation. No claims can be made after the product has 

been fitted.

PLEASE NOTE :The minimum and maximum adjustment sizes noted on the product brochures are based on 

perfectly plumb walls and trays.

6

PH2 TYPE

2.75

INSTALLATION  INSTRUCTIONS                           

www.aprilproducts.co.uk

Tools Required

Lifetime Product Guarantee

ATTENTION!

The Lifetime Product Guarantee is only valid

has been completed and returned within  

30 days of installation. 

In addition the product must be used and 

maintained in accordance with the 

 

once the April Guarantee Registration Form 

manufacturer’s instructions

(guarantee excludes seals and magnets).
Please see our website for full Terms &

Conditions.
To activate your Product Guarantee please visit

www.aprilproducts.co.uk

 and complete the

online form.

Summary of Contents for Identiti AP6003L/R







Reviews: