IMPORTANT - Missing Components
Please check this product for missing components prior to installation.
For spare parts visit
www.aprilproducts.co.uk
.
IMPORTANT - Installation site
1. Ensure the top surface of the bath on which the bath screen will be installed is level in very direction.
2. The tiles or other wall finishing should be effectively sealed at bath edges.
3. Tiles should extend at least to the corner of the bath.
FIXING KIT COMPONENTS, SITE CONDITIONS
FIXING KIT
Wall Plug
x3
Screw ST4x30
x3
Support arm x1
Glass Clip
x1
Support Arm
x1
Connector
x1
Wall Fixing
x1
Screw M8x6
x2
Gasket
x2
Cover Cap
x2
Wall Plug
x2
Screw ST4x30
x2
Hinge
x2
Screw ST4x12
x3
Horizontal rail
fixing A x2
Horizontal rail
fixing B x2
Screw Cover Cap
x3
Cup x3
Wall profile top cap
x1
Bottom rail
x1
Bottom seal
x1
LH
RH
4.The screen can only be constructed in the hand that is specified on the box label. This instruction is showing the
installation process for a LH screen.’
