4
Step 4.
Remove the wall profiles and drill the marked points using an 6mm masonry drill bit, once this is done insert 8 × wall
plugs (
No.27
).
Step 4
Step 3.2 & 3.3
Step 3.
3.1
Push the wall profiles (
No.1
) onto the frame.
3.2
Place the assembled frame onto the tray.
3.3
Level the frame using a spirit level.
3.4
Once you are happy that the frame sits on the tray correctly mark the wall through the 4 pre-drilled screw holes in the
wall profiles.
NOTE:
You may find it easier to mark and drill the wall if you apply masking tape to it first.
Step 3.4
Step 3.1
