Step 6.
6.1
Drill 3 equally spaced holes with a 2.75mm drill bit through the wall profiles and frame.
6.2
Fix the frame to the wall profiles using the screws ST3.5 × 10
Step 6.1
Step 7.
Fix the handle to the door panel as shown. Fit the cushion gasket (No.30) to the bottom
centre hinge as per the diagram.
Step 7
Step 8
Step 8.
Step 6.2
Once you are happy that the installation is correct, push 5 x Profile Clips (No.15) in to the wall profile and evenly
space. Push the Cover Profile (No.2) into the Profile Clips as shown.
