30
31
PROGRAM SCHEDULE AND HOLDS
AWAY
The Away feature, if enabled, allows the Home Comfort
Control to be set to a predefined setpoint(s) by simply
pressing the Away button in your home automation
interface (if supported) . The default cooling setpoint
is 85°F (29 .5°C), the default heating setpoint is 62°F
(16 .5°C) and the default fan mode is Auto . The default
settings can be modified in the home automation
interface (if supported) .
To cancel Away at the Home Comfort Control
press
[CANCEL HOLD]
.
PROGRAM SCHEDULE HOLDS
– AWAY
VACATION PROGRAM HOLD
This energy saving feature allows you to suspend the
programmed schedule for extended periods of time . The
temperature and dehumidification setpoint (optional)
you select will be maintained 24 hours a day until the
vacation program hold end date and time . Once the
end date and time have been surpassed, the previously
programmed schedule will resume . If you return earlier
than expected,
press [CANCEL HOLD]
to resume the
programmed schedule .
Press
or
to adjust the
temperature setting .
Press [MENU]
to enter
the main menu .
Press [SET VACATION]
to enter vacation
program hold .
PROGRAM SCHEDULE AND HOLDS
Press [NEXT]
, then adjust the dehumidification setting .
Note:
If dehumidification in vacation mode is not
enabled this step will be skipped .
PROGRAM SCHEDULE HOLDS
– VACATION
