7
AS-3004 User Manual
EN
WARNING!
Cleaning with Water
•
Always switch off the shaver before cleaning it.
•
Do not use any harsh or abrasive cleaning agents.
•
Do not remove the shaving foil from the shaving foil frame and do not clean it
with the brush.
•
Do not pull the 2 cutting blades off the white holder.
NOTE: Clean the shaver after every use to warranty optimal results.
•
Press on both unlocking buttons simultaneously to remove the shaving foil (in
frame) from the blade head frame.
•
To thoroughly clean and remove the cutting blades, it is also possible to remove
the blade head frame from the shaver by simultaneously pressing both unlocking
buttons.
•
Knock the blade head on a flat surface and blow it out.
•
Clean the cutting blades with the cleaning brush.
•
The cutting blades are easily removed by pulling up and can then be cleaned
separately. Make sure the cutting blades securely snap back into place when
reattaching the blades.
The removed shaving and cutting parts of your shaver are easily cleaned under
running water. The water temperature should not be above 70 °C.
DRY CLEANING
