19
use and maintenance
Leonardo 125 - 150 - 250 - 300
CONTROLS ON THE RIGHT SIDE
OF THE HANDLEBAR
NOTE
The electrical parts work only when the ignition switch is
in position "
&
".
1 ) DIMMER SWITCH (
2
-
-
)
( not provided for those countries where the engine stop
switch
≈
'
-
&
∆
is required)
When it is in position
≈
2
∆
the parking lights, the dashboard
light and the low beam are always on.
When it is in position
≈
-
∆
, the high beam comes on.
1a) ENGINE STOP SWITCH (
&
-
'
)
(in the countries where required)
!
WARNING
Do not operate the engine stop switch “
&
-
'
” in running
conditions.
This is a safety or emergency switch. With the switch in
position
≈
&
∆
, it is possible to start the engine; the engine can
be stopped by moving the switch to position
≈
'
∆
.
!
CAUTION
With stopped engine and ignition switch in position “
&
”,
the battery may run down.
When the vehicle has come to a halt, stop the engine, and
move the ignition switch to position “
'
”.
2) START PUSH BUTTON (
3
)
When the start push button
≈
3
∆
is pressed, the starter makes
the engine run. For the starting, see p. 33 (STARTING).
Leonardo125-300_UK.book Page 19 Tuesday, January 20, 2004 3:54 PM
