75
press the Esc soft key to move back to the Dwell Time Parameter screen. When
the Enter soft key is pressed, the time is accepted and you transition into the next
parameter: Ramp Down.
If you wish to bypass editing this parameter and move to the next parameter you
can press the Prev or Next soft key.
4.6.16 Editing Ramp Down (PROGRAM Mode only)
Use the
∧
,
∨
soft keys to navigate to the Ramp Down parameter. Pressing the
Edit soft key will provide the following screen:
Ramp Down = indicates the ramp down time that is programmed into the
instrument.
Ramp Down Time Range: indicates the ramp down time range that can be
programmed into the instrument.
To change the ramp down time, use the numeric keypad and type the time.
Once you type in a number a shaded black box ( ) will begin blinking
acknowledging the parameter is being changed. Press the Enter soft key to
accept the time, or press the Esc soft key to move back to the Ramp Down Time
Parameter screen. When the Enter soft key is pressed the time is accepted and
you transition into the next parameter: Step Cycle.
If you wish to bypass editing this parameter and move to the next parameter you
can press the Prev or Next soft key.
4.6.17 Editing Step Cycle (PROGRAM Mode only)
Use the
∧
,
∨
soft keys to navigate to the Step Cycle parameter (only selectable
for AC output). Pressing the Edit soft key will provide the following screen:
Summary of Contents for 310XAC
Page 13: ...13 320XAC 340XAC...
Page 116: ...116 1 Test Complete OK WAI Wait for next command...
