82
programmed into the instrument. If you select the 0=OFF apparent power range
is turned OFF.
VA Lo-Lmt = indicates the apparent power low limit that is programmed into the
instrument.
VA Low Limit Range: indicates the apparent power range that can be
programmed into the instrument.
To change the Apparent Power High Limit or Low Limit use the numeric keypad
and type the peak current value. Once you type in a number a shaded black box
) will begin blinking acknowledging the parameter is being changed. Press the
Enter soft key to accept the parameter, or press the Esc key to move back to the
Apparent Power Parameter screen. When the Enter soft key is pressed the
apparent power is accepted and you transition into the next parameter: Q Hi-Lmt.
If you wish to bypass editing this parameter and move to the next parameter you
can press the Prev or Next soft key.
4.6.24 Editing Q Hi-Lmt & Q Lo-Lmt (PROGRAM Mode only)
Use the
∧
,
∨
soft keys to navigate to the Q Hi-Lmt or Q Lo-Lmt parameter (only
selectable for AC output). Pressing the Edit soft key will provide one of the
following screens:
Q Hi-Lmt = indicates the reactive power high limit that is programmed into the
instrument.
Summary of Contents for 310XAC
Page 13: ...13 320XAC 340XAC...
Page 116: ...116 1 Test Complete OK WAI Wait for next command...
