INSTRUCTION MANUAL
STEP 4
Designed by PJ Production & Hans Thyge & Co // Hårup Skovvej 2, 8600 Silkeborg, Danmark // + 45 86 81 23 75 // www.aptocollection.dk
Copyright ©
The felt wall must be aligned with the cable management before continuing. Now connect the felt wall and cable management
with either four or six screws, spacers, and nuts, - depending on the size of the cable management. When these are connected,
carefully insert the tip of the screwdriver into the hexogon cross section of the screw and turn the screwdriver in a clockwise fashion
until the screw has been sufficiently tightened. Repeat the process with the remaining screws.
