background image

17

AU

Telephone Helpline: 1300225960

Electrical Wiring

The plug is to be connected to a suitable mains socket.

This appliance is wired as follows:

•  Live wire (coloured brown) to terminal marked L

•  Neutral wire (coloured blue) to terminal marked N

•  Earth wire (coloured green/yellow) to terminal marked E

This appliance must be earthed.  

If in doubt consult a qualified electrician.

Electrical isolation points must be kept clear of any obstructions. In the event of any emergency 

disconnection being required they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must not be disposed of 

as household waste. To help prevent possible harm to human health and/or the environment, the product 

must be disposed of in an approved and environmentally safe recycling process. For further information 

on how to dispose of this product correctly, contact the product supplier, or the local authority responsible 

for waste disposal in your area.

Apuro parts have undergone strict product testing in order to comply with regulatory 

standards and specifications set by international, independent, and federal authorities.

APURO products have been approved to carry the following symbol:

All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, 

mechanical, photocopying, recording or otherwise, without the prior written permission of Apuro.

Every effort is made to ensure all details are correct at the time of going to press, however, Apuro reserve the right to 

change specifications without notice.

GL190-A_GL191-A_GJ461-A_A5_v5_20190321.indb   17

2019/3/21   17:55

Summary of Contents for GJ461-A





















Reviews: