Note: The Light fixture connected through the DMX connectors will have only one lead lamp
after entering the lead-follow mode, and the rest will be follow lamps.
-12-
Lead-follow Mode: In the Lead-follow Mode, the user can set the device as the lead
light and the follow light. When adjusting the functions and parameters of the lead
lamp, the follow lamp will automatically adjust to the same state as the lead lamp.
Set the Lead light: Connect the light fixtures through the DMX cable, select a Light
fixture and press the MENU button to enter the menu interface. Rotate the Select
wheel to select the mode. After selecting the Lead-follow Mode, short press the
Select wheel to enter the Lead-follow mode setting interface. Select YES in the
setting interface to set the light as the lead light, and other light fixtures connected
to the lead light will become the follow light. If you need to change the follow lamp
to the lead lamp, repeat the above operation for the follow lamp.
Press the MENU button to enter the menu interface, rotate the Select wheel to select
Dimming Curve, and press the MENU button to enter the Dimming Curve selection
menu. Using the wheel to choose from linear, S-Curve, exponential (Exp) or
logarithmic (Log) dimming curves, and press the MENU button to confirm the
selection.
2.2) Lead-Follow Mode
2.3) Dimming Curves
