PRODUCT:
QUANTITY:
ITEM #:
Models:
BM-80
BM-80D
BM-80-UL
BM-80D-UL (“D” designates drain)
Designed Smart
Built Solid
APW Wyott Design Features
Options
Insulated Hot Food Wells
Bottom Mount Series
APW Wyott Foodservice Equipment Company · 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com· info@apwwyott.com
Rev. 5/22/2005
Insulated Bottom Mount Hot Food Well BM-80
• Constructed of deep-drawn 20 ga. type 304 stainless steel.
• Units with drain are provided with stainless steel ½ NPT
drain welded to bottom of pan and provided with
removable screen.
• Entire heat assembly covered with inspection housing
with layer of 1 1/2" thick compressed fiberglass insulation.
Reliability backed by APW Wyott’s Warranty
• All APW Wyott food wells are backed by a 1-year parts
and labor warranty, including on-site service calls within
50 miles of authorized service technicians.
• Certified by the following agencies:
• 20 ga. deep-drawn stainless steel well pans.
• Available with or without drain.
• Unit may be used wet or dry (wet use offers best
results).
• Easy access to heating elements.
• Thermostatic control with 36” capillary (effective
length 26”).
• Large indicating pilot light.
• Multiple units can be installed in same table or
counter.
• Multiple wattages and voltage choices
• Thermostat with 72” capillary (effective length 62”)
• Recessed bezel (56360)
• Drain kit (56420)
• Lever operated shut off valve (56360)
• Infinite Controls
• Square corners - BM-80C
See reverse side for product specifications.
Greatest Selection of Hot Food Wells!
• Heavy-duty bottom mount, insulated rectangular drop-in
hot food well is designed for installation in metal
countertop.
• Available with Round Corners or Square Corner (add
a "C" to model number) designs.
• Units available in a UL recognized component
construction with open wires and increase-decrease
plate or complete UL listed construction including
electrical conduit, bezel and control box.
• Available in a variety of wattage power to accommodate
your needs, whether it is for High Performance, Fast
Recovery power or Energy Efficient, Lower wattage
(750 watts) power.
• Available with Welded Drain Design or no drain.
Most Effective Heat System!
• All Bottom Mounted Food Wells are heated by tubular
calrod heat element shaped in serpentine fashion for
even heat distribution to pan base.
• Element is mounted under well and secured by an
aluminized reflector shield for maximum efficiency.
• Thermostatically controlled for fast heat recovery.
