16
Smart Security
PANDUAN
PENGGUNA
Installation
•
Open the sensor case and insert the battery
properly.
•
Sensor can be attached to doors or windows
that can be opened and closed. Make sure door/
window surface are clean.
•
Place double-sided adhesive tape on the back of
the transmitter and magnet sensor. Carefully install
the magnet part on the door/ window and the
magnet part on the door/ window frame.
•
Make sure the LED indicator is in the correct
direction and make sure the magnet part is on the
right side of the transmitter.
•
Place the transmitter sensor at the desired spot.
Install the magnet with a distance of not more than 1
cm from the transmitter sensor.
•
Avoid installing the sensor in areas where there is a
lot of metal and power cables.
Note! Door/ window will be automatically set in
zones 1 normal as standard setting. This will cause
an alarm to sound and send a notification to the
app directly if the magnet moves away from the
transmitter sensor more then 2 cm whenever the
alarm mode is activated.
