27
www.getaqila.com
Exit/ Entry Delay
Set exit / entry delay time for sensors that are in the
Delay Zone. This option is used let you leave or enter
the house without directly activating the alarm. After
the exit / entry delay time is set and the alarm system
is activated, if the delay time is less than 10 seconds,
the Aqila Securehub™ will beep once every second.
However, if the delay time is more than 10 seconds,
the Aqila Securehub™ panel will beep every 2 seconds
with an increasing tempo in the last 10 seconds as a
notification for you to entering or leaving the house as
soon as possible.
Alarm Type
You can set the siren in Loud Mode or Silent Mode
Wired Sensor Type
Select the wired sensor type after the sensor is
connected, type NC or NO.
Remote Control Notifications
Whenever the alarm is activated via remote control, you
will get a notification about who are do the operation via
remote control. Notifications will be sent via app and sms
(when disconnected from Wi-Fi).
Device Language
Change the system language. Note: Language in the app
will follow the chosen language in your mobile phone
settings.
Door Sensor Monitoring
When the alarm is activated but there is a door / window
in open condition, the system will give a warning and
send notification. Door / window status can be seen on
sensor section in Aqila Smart App.
