150Mbps Wireless Lite-N USB Adapter – APPUSB150 User’s Guide English
Wireless Mode when Starting an Ad Hoc Network -
Specifies 2.4 GHz 54/11 Mbps to
start an Ad Hoc network if no matching network name is found after scanning all availa ble
modes. This mode also allows the selection of the channel that the Wireless Adapter uses.
The channels available depend on the regulatory domain. If the adapter finds no other ad
hoc adapters, the channel that t he adapter starts the ad hoc net work with will be selected
automatically. The Adapter mu st match the wireless mode and channel of the clients it
associates.
802.11 Authentication Mode -
Select which mode the Adapter uses to authenticate to an
access point:
Auto -
Automatic cause s the adapter to atte mpt authentication using sh ared, b ut
switches it to open authentication if shared fails.
Open -
Open System enables an ad apter to a ttempt authentication regar dless of its
WEP settings. It will only associate with the access point if the WEP keys on both the
adapter and the access point match.
Shared -
Shared-key only allows the adapter to associate with access points that have
the same WEP key.
For infrastructure (access point) networks, click
Preferred APs…
to specify four access points
at most to the client ad apter that attempt s to be associated to the access point s. The fou r
access points have different priorities; the frontal has the higher priority.
Figure 3-7
3.1.2.2. Remove a profile
1. Go to the Profile Management tab (shown in Figure 3-2).
2. Select the profile name in the Profiles List.
3. C lick
Remove
.
Note:
The profile being used can’t be removed.
65
