17
Pool Mode Set Point:
When SELECT button is pressed the control displays pool set point screen “POL”
•
The set point is raised by pressing the UP button up to desired temperature.
(95°F, 35°C maximum)
•
The set point is lowered by pressing the DOWN button down to 61 (61°F, 10°C).
When DOWN button is pressed again then “OFF” will be displayed.
•
The set point is adjusted faster by holding pressed UP or DOWN button.
Spa Mode Set Point:
When SELECT button is pressed again after POL is displayed
the control displays spa set point screen “SPA”
•
The set point is raised by pressing the UP button up to desired temperature.
(104°F, 40°C maximum)
•
The set point is lowered by pressing the DOWN button down to 61 (61°F, 16°C)
When DOWN button is pressed again then “OFF” is displayed.
•
The set point is adjusted faster by holding pressed UP or DOWN button
Solar Mode Set Point
This feature shows only when enabled in Configuration menu.
When SELECT button is pressed again after SPA is displayed the control
displays spa set point screen “SSP”
•
The set point is raised by pressing the UP button up to 105 (105°F, 41°C)
•
The set point is lowered by pressing the DOWN button down to 61 (61°F, 16°C).
The value for SSP may be equal to or greater than the value for POL but not
lower when operating in pool mode. The value for SSP may be equal to or
greater than the value for SPA but not lower when operating in spa mode.
•
The set point is adjusted faster by holding pressed UP or DOWN button
Pool vs. Spa Mode Selection
When SELECT button is pressed again after SPA or SSP display
then shows Pool vs. Spa mode screen is, “P_S”
•
Pool mode is selected by pressing UP button
•
Spa mode is selected by pressing DOWN button
•
Note this will be overridden by the remote pool spa switch.
Pool Heat vs. Cool Mode Selection
This feature shows only when enabled in Configuration menu.
When SELECT button is pressed after P_S display the control displays
pool heat vs. cool mode screen “PHC”
•
With UP button user sets the Pool Heat mode, “P_H”
•
With DOWN buttons user sets the Pool Cool mode, “P_C”
•
With either UP or DOWN buttons a second time user sets the Auto mode, “AUt”.
This is set for heat-cool units to automatically switch between heating and cooling.
