background image

Copyright © 2014 Aqua Creek Products All Rights Reserved

Revised 7/24/2014

6     Pre-use Checks

Failure to carry out these checks before using the product may result in damage to the beach 
wheelchair and/or injury to the user.

Before using, please check the following points:

6 -1     Tire Condition

Caution! -

 

If there are any faults or malfunctions, do not use the beach wheelchair and 

contact your retailer.

• 

Tire pressures are affected by changes in 
temperature and altitude. Check and adjust 
them whenever you are using the chair in 
areas where there are large variations in 
temperature or altitude.

• 

Check the user weight and adjust a suitable 
tire pressure that is not over the maximum 
pressure mentioned below.

• 

Maximum front rubber pneumatic tire 
pressure: 

7 psi – 48.2 kpa

• 

Maximum rear rubber pneumatic tire

       pressure: 

7 psi – 48.2 kpa

6 -2     Armrest Condition

• 

Check the armrest conditions and make sure it 
is not punctured or releasing any air.

• 

Do not inflate the armrest over 7” (17.78 cm) 
in armrest center thickness as photo shown on 
right.

Valve

Valve

Center of Armrest

6-3     Controls

• 

Check the frame, fork, folding system and 
tire/armrest condition and ensure that they 
function correctly.

10

Summary of Contents for Mobi-Chair F-017WWBC













Reviews: