background image

Copyright © 2014 Aqua Creek Products All Rights Reserved

Revised 7/24/2014

7     Maintenance

• 

To ensure that your mobi-chair stays in good condition, the mobi-chair should be rinsed with 
fresh water after EVERY use. The connecting plates and rods must be rinsed thoroughly to 
remove all sand, salt and dirt from the mobi-chair. Failure to clean the connecting parts of the 
mobi-chair may result in creating forms of corrosion of the product. All connecting rods should 
be greased at the user’s discretion to ensure that the product remains in good condition.

8     Specifications

ITEM #

SPECIFICATION

Model

BW-100

Frame

Folding aluminum frame & stainless fork and hardware, salt water resistant

Seat Width

18 in (46 cm)

Seat Depth

17 in (43 cm)

Seat Height

19 in (48 cm)

Product Length 60 in (153 cm)
Product Width

41 in (105 cm)

Product Height

50 in (127 cm)

Product Weight 77 lb (35 kg)
Armrest

PVC Flip Up & Detachable Floating Armrest

Front Castor

12” x 6-1/2” Rubber Pneumatic Tire*1 w/quick release

Rear Wheel

16” x 7-1/2” Rubber Pneumatic Tire*2 w/quick release

Seat fabric

Non-Allergic, UV Resistant, Water Resistant Ventilated

Backrest

4 sections adjustable

Weight Capacity 300 lb (135 kg)

11

Summary of Contents for Mobi-Chair F-017WWBC













Reviews: