Copyright © 2016 Aqua Creek Products All Rights Reserved
Revised 12/13/16
Installation Instructions
3. Before the Gurney Attachment can be installed on the Revolution Lift, the chair must be removed
as shown below. Save the hardware for reinstallation, or use the supplied safety pins for quick
change-over when both the chair and gurney attachment are used frequently.
REMOVE HARDWARE,
SLIDE CHAIR AND
CHAIR CRADLE DOWN
AND OFF CHAIR ARM
CHAIR ARM
CHAIR CRADLE
4. Install gurney attachment with supplied safety pins as shown. Make sure to install the top pin in
the top hole of the chair arm to ensure that the gurney attachment will be able to lift the gurney
off the floor/deck. Loop safety clips around back of attachment tube and clip over safety pins to
keep pins from slipping out of the holes.
SAFETY
PINS
ALIGN W/TOP
HOLE
CHAIR ARM
3
