6
Programmable light control for Aqua Medic aquarius
1.
Technical Data
- 24 V safety voltage
- dimensions:
11.0 x 6.0 x 2.5 cm
2.
Unpacking
On unpacking, please check the light control immediately for any damage. In case of any problems,
please contact your dealer directly.
3.
Included in shipment
•
aquarius control
A ‘Y’-cable for connecting several aquarius lights to one control unit is available as an accessory.
4.
Installation
4.1. Programming
The aquarius control may only be used with the designated socket (pict. No. 1) of an aquarius.
The
internal battery will need to be charged before use. After charging, the controller can be switched on
independently from the light by pressing the "M" and "OK" buttons simultaneously.
Fig. 1: Socket for aquarius control
Buttons:
M:
menu
OK:
confirm
＋
up
－
down
1.
The display appears as soon as the controller is plugged into the socket of the aquarius. After
pressing the M button, also the display illuminates. After a few seconds without further keystroke
the display lights turn off.
2. Press “M” (menu), then four setting options appear:
Date and Time: for setting the real time and date
Manual:
for manual adjustment
Fixed Mode:
fixed program of sunrise and sunset
Setting Mode: an automatic program according to the user's needs can be adjusted
