8
Moonlight:
The programming of the moonlight is done by using the
MOON
button.
Intro- and diminishing time of the moonlight (also refer to item 2) are adjusted as follows:
Press the
MOON
symbol:
- Initially,
II 1
is alternately displayed with the current intro-time.
- Press
+
or
-
button to adjust the desired on-time, i. e. „0.30“ for 30 minutes.
- Press
MOON
to store the intro-time.
- Afterwards,
II 2
is alternately displayed with the diminishing time.
- Press
+
or
-
button to adjust the diminishing time and press
MOON
again to store it.
6. Failures
In case of failures during the programming procedure, the complete program can be deleted and
re-started:
- Pull out the plug.
- After 10 seconds, press and hold the
TIME/DATE
button.
- Put in the plug.
- Now, all values are set to 0; the Light Computer is ready for re-programming.
- If one channel fails, i. e. because of an overload caused by lamps with a too high wattage, the
unit has to be sent in.
7. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase
AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. The warranty term is not applicable on the all consumable products. Proof of Purchase is
required by presentation of an original invoice or receipt indicating the dealer’s name, the model
number and date of purchase, or a guarantee card if appropriate. This warranty may not apply if
any model or production number has been altered, deleted or removed, unauthorised persons or
organisations have executed repairs, modifications or alterations, or damage is caused by accident,
misuse or neglect.
We regret we are unable to accept any liability for any consequential loss. Please note that the
product is not defective under the terms of this warranty where the product, or any of its
component parts, was not originally designed and / or manufactured for the market in which it is
used.
These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance. Before calling your dealer please ensure
you have read and understood the operating instructions. If you have any questions your dealer
cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved - 12/2012