19
•
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components.
•
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of
defects and a copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the
manufacturer.
•
When working on the light, always pull all power plugs.
4.4. Assembling/changing the lamp
Broken LEDs can be exchanged only by the manufacturer.
Electric connection:
The
Ocean Light LED
can be connected to any safety socket or a timer, if automatic operation is
required. In case of using a timer, all LEDs will be switched on and off at the same time.
A separate control of white and blue LEDs is possible by using the controller
sunrise Control
.
It
can be connected to the connection socket of the Ocean Light LED by a control cable that
is available as an accessory (Art.-No. 86604).
Furthermore, there is the control unit
Ocean
Light LED Control
available as accessory. A Y-cable (Art.-No. 86608) for connecting both Ocean
Light LED’s is available as accessory.
When working on the light, always pull all power plugs!
4.5. Maintenance and Care
Clean the glass regularly (caution: let it cool down) from residues of water splashes and
evaporation with a moistened cloth. Never use any additional cleaning agents!
5.
Cover with fan
The fan (12 V/ 2 watts) is connected to the supplied transformer (90 – 240 V / 50/60 Hz).
The fan
is adjustable and should remain constantly in operation at low power
. Otherwise, water will
condense in the LED lights during the dark phase. If the outside temperatures are high, the fans
can be operated with higher speed.
5.1. Maintenance
The fan should be cleaned regularly, in particular the salt residues have to be removed. The fan
can be exchanged separately. Only exchange the faulty fan for an original Aqua Medic fan. Only
these are suitable for the installation to aquaria.
6.
Operating the aquarium
Fill the aquarium with water up to the overflow combs (approx. 320 l). Then start the pumps. If
there are air bubbles coming out of the current pipe fill water in the front (approx. 2 - 5 l) until the
bubbles disappear.
For operating the
Magnifica
, we recommend our
Reef Life System Coral
as accessories:
•
Reef Life Calcium, KH Buffer, Trace or Reef Life Calciumbuffer
supplies corals with
essential calcium and trace elements.
•
Other products of this series, such as
Reef Life Iodine, Reef Life Strontium
or
Reef Life
Magnesium
have also proved to be essential for the care of many corals.
If these additives are applied combined and regularly, they guarantee for successful salt-water
aquarist.
