6
1. Technical Data
Power requirements:
230 Volt, 50 Hz, if not noted otherwise on the ID-label.
The lighting systems are delivered with bulbs.
Bulbs:
Ocean light :
150 W
aqualine 10000
(colour temperature 13,000 K)
Ocean Light plus:
150 W
aqualine 10000
(colour temperature 13,000 K)
+ 2 x 24 W T5
Ocean Blue Actinic
2. Unpacking
Control the lighting system immediately after unpacking with respect to any damages. In case of
complaints, please contact your dealer directly.
3. Safety advices
•
The lighting system cannot be used as aquarium cover. It has to be mounted only above the
aquarium. The minimum distance between lighting and aquarium must be at least 30 cm.
•
The lighting system may not be operated without protection glasses. The non-filtered UV light
may damage the aquarium inhabitants and also people.
•
The housing and protection glasses may become hot during operation. Be cautious when
touching them!
•
Before any replacement of bulbs, disconnect the lighting system from the mains and let it cool
down. Afterwards, take the lighting down.
•
When cleaning, take care that no humidity passes the ventilation slits and enters the interior of
the lighting system!
•
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount
the system in enclosures or behind panels. Missing aeration may result in overheating and
damage electrical components that may be the cause of noise production.
•
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of
defects.
4. Installation
Suspension:
The lighting comes with a steel cable. It can also be suspended with a chain (only
starlight) or by using our wall mounting
aquawall
which is available as accessory.
The wire suspension system provides a neat and simple method of ceiling mounting of
Ocean
Light
and
other suitable luminaires.
Contents: The suspension system comprises 2 pcs. of each of the following:
- 2 metre stainless steel wire with ferrule
- ceiling plate c/w retaining bush
- luminaire attachment c/w plastic washer
- screws and plugs
Mounting:
The ceiling plate (1) must be securely screwed to the ceiling. Suitable screws and plugs are
provided but you should ensure your ceiling is capable of holding the weight of the luminaire in this
way. It may be necessary to use special cavity plasterboard fixings or to screw through into blocks
you have fitted behind the ceiling.
