8
5. Replacement of bulbs
Disconnect lighting from the mains connection and let it cool down. Take the lighting down.
Unscrew one of the side panels and pull out the filter disc to the side. The replacement of bulbs
differs depending on type of bulb.
150 W bulbs:
Removal:
Press one base of bulb against the
spring pressure deeply into the holder (Fig.
II) until it is possible to remove the second
base (Fig. III).
Insert:
Do not touch the cylindric part of the
new bulb! Take it at the small side.
Note:
Fingerprints etc. on the cylindric part
of bulb can easily be removed with alcohol or
methylated spirit.
6. Maintenance and Care
The bulbs have a life span of approx. 6,000
to 8.000 hours. This corresponds to around
1.5 years with a daily illumination time of 10
hours. It is recommended to replace bulbs
before this time because performance and
colour composition change towards end of
lifespan.
Clean filter glass regularly (caution: let it cool
down!) from residues from water splashes
and evaporation with a moistened cloth.
Never use additional cleansing agents!
7. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase
AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer’s
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss.
Please note that the product is not defective under the terms of this warranty where the product,
or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used. These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance.
Before calling your dealer please ensure you have read and understood the operating instructions.
If you have any questions your dealer cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB AQUA MEDIC GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved- 04/2011
