Cabinet’s assembly for Aquarium PERCULA
The assembly of the cabinet is done according to the following drawing.
Take care that the bore-hole of the cabinet plate is located on the right side of the cabinet. The
door where you can hide the socket board has to be fixed at the right side as well.
1x bottom plate
1x lid with cap
2x inlaid plates
2x wall plates
1x wall plate incl. bore hole for hinge
1x door
1x back panel
18x wood pegs
12x connecting pins
4x pins for inlaid plates
2x hinges
1x knob
nails
AB AQUA MEDIC GmbH - Gewerbepark 24 – 49143 Bissendorf/Germany
- Technical changes reserved – 04/2010
