9
Display
-
T.D.S.: Total Dissolved Solids
-
FULL: Not applicable since the unit is supplied without storage tank
-
WORK: In operation
-
POWER: Power is connected
-
SOURCE: Water is connected
-
FLUSH: Back flush
Now, the water will start to flow from the waste water outlet (14). After some time, also purified
water flows out of the pure water outlet (2), however, at a lower flow rate. Low pressure or
temperatures reduce the pure water volume. The pure water, produced in the first 2 hours, has to
be discarded as it may contain residues of the disinfectant liquid which has been used in the
module for storage. After 2 hours, the water can be used.
Fig. 4: platinum line plus
Available spare parts: Please refer to
www.aqua-medic.de.
The display shows the remaining salt content of the osmosis water. If the value rises, the resin has
to be replaced in the demineralization fiter. To do so, turn the unit off, open the 10" housing with
1.
Water inlet
2.
Pure water outlet
3. Flush valve
4.
Module’s screw cap
5.
Module incl. membrane
6.
Prefilter housing for fine
filter
7.
Prefilter housing for
activated carbon filter
8.
Demineralization filter
9.
High-pressure pump
10.
Control unit
11.
Power supply
12.
Magnetic valve
13.
High-pressure button
14.
Waste water outlet
15.
Magnetic valve
16.
Low-pressure button
17.
Pressure gauge
18.
Mounting bracket
19.
TDS sensor
Summary of Contents for platinum line plus
Page 32: ...32 ...