5
1.
Features
The inside aquarium filter PF 1000 is very quiet in operation. It has a fully encapsulated
synchronous motor. All materials are salt water resistant.
The polished ceramic shaft is practically wear-resistant, ensuring a long operating life. The whole
pump can be disassembled for cleaning. Each electrical part is encapsulated.
The filter can be used in aquaria up to 100 l as filter or as current pump in larger aquaria.
2.
Technical Data
Type:
Powerfilter PF 1000
Line voltage:
230 V/50 Hz
Power consumption:
10 W
Maximum litre/hour:
1,000 (16)
Pump height (max):
1,0 m
Length of cable:
1,5 m
Protection:
IP68
Maximum submergance: 1 m
Max. water temperature: 35°C
3.
Parts of the pump
1.
Motor housing
2.
Pump head
3.
Air injection nozzle
4.
Filter basket
5.
Filter sponge
6.
Lid for filter basket
7.
Holding plate
8.
Rubber sucker
9.
Rotor / magnet and impeller
10.
Ceramic shaft
11.
Rubber bearing
12.
Power cable
4.
Mounting:
The filter is designed for underwater use only. The max. submergance is 1 m. In any case, dry
running of the pump has to be avoided since this would destroy the bearings.
The holding plate (7) with the rubber suckers (8) can be connected with the pump from 2 sides.
The pump head (2) can be fitted to the motor (1) in 2 ways, so the outlet can be adjusted. A
further possibility to direct the water flow is the use of the 45° elbow. If aeration is desired, the air
injection nozzle can be mounted.