8
Fig. 1: Program’s example. Only the „white channel“ is used.
A special control cable is required for controlling the unit. By using the coupling and protective
rubber sleeve that came with the spot, the control cable is connected waterproof to the control
cable of the spot (see Fig. 2). The yellow minus-line of the control cable has to be connected to the
white line of the LEDspot control cable.
1. Union nut 2. Protective rubber sleeve 3. Yellow sealing 4. Control cable (yellow = minus)
Pict. 2: Connecting the control cable
The LEDspot can not be dimmed completely down due to the built-in ballast. Therefore, the sunrise
control has to be switched of completely after the program has ended by an additional timer. In the
morning, it has to be started again before the program starts. The sunrise control is equipped with
its own power supply.
