9
3.1.1. Programming via clock
Fig. 3: sunrise control
1.
Time display
2.
Moon phase
3.
Light intensity
4.
Programs
5.
Light key
6.
Socket for USB cable (with inserted plug)
7.
Power supply
8.
Connection for control cable (3 x available)
Available spare parts: Please refer to www.aqua-medic.de.
The clock lighting can be switched on by the
light key (5)
. By the
menu key
, the individual
parameters such as time, programs, percentage are reached that can be changed by the
+ and –
keys.
The use of multiple channels or non-inverted programs is not possible with LEDspot. But
the sunrise control can be used for other lamps (e. g. aquareefLed, Ocean Light LED)
with other control cables also available as accessories.
Program P9 is pre-adjusted and can only be changed at the computer. By the
menu key
, the
program is reached by pressing the
+ and – keys
. In the same way,
time (1)
,
light intensity
in
per cent (3)
and the respective
moon phase (2)
can be adjusted. A change in the percentage
adjustment (3) has no effect during the light phase because the program is set to 0% at full light
intensity (inverted).
Also, the data of the moon light control given in the program cannot be changed by the clock.
The programs in DimEdit can be opened either by one double click of the left mouse
button or by one click and a second click on the button „opening“.
Copy DimEdit as well as the associated programs for the light control of the USB stick provided into
a file on the hard disk of your computer. The program can be started without further installation.
By the button „loading“ the light programs included in delivery can be opened. By clicking and
holding the left mouse button, curves can be created. Times and percentages are indicated in the
lower, light blue bar. In the case of LEDspots, only the white channel is active.
The programs can be changed by loading them with DimEdit, modify and then store them under
the same or a new name.
