10
7. Troubleshooting
Fault and Reasons
Solutions
Compressor doesn’t start or stop after starting
1. Power failure or voltage exceeds
±
10% rated voltage. Supply power, check voltage.
2. Thermostat fault.
Repair or replace.
3. Fuse is damaged.
Replace.
4. Fan doesn’t work or water pump can’t start.
Check the fan and water pump.
Compressor stops when working
1. Compressor temperature is too high.
Check the dust on the heat radiator in
the back.
2.
Compressor
overload,
overload
protection
is
activated.
Improve the heat radiating condition of
the machine room.
Cooling (heating) performance drops or the
system can’t cool or heat at all
1. Inlet air temperature of condenser is too high or too
low.
Adjust the using environment of the
machine.
2. Fish tank has poor heat preserving performance.
Improve the environment of fish tank.
3. Cooling oil is missing or compressor damaged.
Maintanance by a specialist.
8. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase,
AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer’s
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss.
Please note that the product is not defective under the terms of this warranty where the product,
or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used.
These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance.
Before calling your dealer please ensure you have read and understood the operating instructions.
If you have any questions your dealer cannot answer please contact us
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification
AB AQUA MEDIC GmbH
-
Gewerbepark 24 - 49143 Bissendorf/Germany
Technical changes reserved – 10/2009
